Product Details:

As an Indonesia Plastic Manufacturer and Exporter, we produce Drain Warden which is a sediment trap made from fabric that is positioned in a stormwater drain under the grate. The polypropylene nonwoven geotextile fabric produced by Indonesia Plastic Manufacturer and Exporter is the filter medium, which traps any particulate greater than 90 microns.

  • Measures 1300m x 1300m x 600mm
  • Traps particles >90 microns
  • Helps you comply with environmental regulations
  • Made from polypropylene nonwoven geotextile fabric
  • Easy to install and remove
  • Can be trimmed to size to fit smaller drains

 

Drain Warden Specifications

INDEX PROPERTIES

TEST METHOD

UNITS

VALUES

Basic Weight

ASTM D5261

g/m2

248.97

Thickness

ASTM D5199

mm

1.9

WWS Tensile Strength MD / CD

ASTM D4595

kN/m

12.25 / 12.5

WWS Elongation MD / CD

ASTM D4595

%

45 – 80%

Grab Tensile Strength MD / CD

ASTM D4632

kN

0.75 / 0.80

Grab Elongation MD / CD

ASTM D4632

%

45 – 80%

Tearing Strength MD / CD

ASTM D4533

kN

0.45 – 0.48

Puncture Resistance

ASTM D6241

kN

2.50

Water Permeability

ISO 11058

L/m2/s

90

DIMENSIONS

Width

mm

1300 x 1300

Height

mm

600

What is Drain Warden price?

Please contact us to ask for drain warden price.
WA: https://wa.me/6282299333938 or https://wa.me/628111721338

Drain Warden Installation Guide

  1. Remove the stormwater grate and clean drain opening and top lip of the This will ensure a better seal and improve the lifespan of your Drain Warden. Use a grate lifting device if necessary or have another person help you lift the grate.

2. Rest the grate on its side and tie the Drain Warden onto the underside of the If supplied, tie the absorbent boom onto the grate so it falls in the center of the basin.

3. Replace the grate back into the drain pit. Pull on the edges to of the fabric to give the best fitting around the drain. Check the ties again to make sure they are tight on the

4. With a cutting tool, trim excess material flush with the grate leaving at least 50mm overhang. If a large gap remains between the grate and the concrete shoulder, fold over the excess geotextile and fold back under to form a filler in the

5. Ensure the grate is correctly replaced and flush to ground level and does not create a trip