Drain warden is not a new thing anymore, it is especially for you who work on a construction project. This product is usually used for filtration purposes since it can catch any contaminants.
It means that this item will catch some pollutants such as dirt, silts, hydrocarbons, etc. On the other side, it still lets the water pass through its layer or pores.
Furthermore, an absorbent drain water can help you to absorb oil and retain sediments at the same time. Since the area that needs it may have different sizes, this item also has many sizes too.
How to Install Drain Warden
After or before purchasing one, you may want to understand about how to install this product. Basically, the methods are so easy that you just need help from a small amount of people.
To do so, insert this drain warden beneath the grate of a stormwater inlet. It will give you proper pollution and sediment control to protect an area from further bad things.
This item is made from the polypropylene fabric. This kind of fabric is good to absorb oil and trap any contaminants. If you want to, you can buy a warden that has pillows on it.
That pillow can absorb hydrocarbon materials. It means that this drain warden will give you more protection and abilities. This type is available in many exporters, and manufacturers, online or offline.
The Further Details to Know
Physically, this warden may maybe looked like just a common fabric. In fact, it has various parts that can run their own functions. Below are the further details about this product.
1. Pockets part
A Drain warden may have three pockets which can allow water to overflow for draining. This function will still be done even if the filter maintained is blocked by something.
Besides that, you may also see the basin part. This basin functions as a netting pond and makes sure the filtration is good.
2. It can hold up to 20 liters of hydrocarbons
The pillow or parts of this product can hold up to 20 liters of hydrocarbons for an emergency spill. It will give you more time to put in area your spill response.
Besides that, it may prevent pollution from leaving your site. That is why; this product is suitable to be installed in any kind of construction.
3. It can be cut
The good thing is that this drain warden can be cut into certain sizes. You may fit the size to smaller drain widths.
The standard product has a drop of 600mm. Furthermore, for shallow drain pits and something like that, you may use the alternative size with a drop of 250mm.
Tips on Choosing the Product
Basically, this product has some varied sizes. The drain warden is also ideal for protecting the storm drain, especially from low-level contamination.
This item will allow more response times to have a larger spill emergency. Several tips are here to make your knowledge is wider. This item is only for removing hydrocarbons and particulates from the stormwater.
You have to maintain this product properly to remove any particle contaminants. Besides that, the drain warden has an equivalent flow area, usually 250mm.
For more information about drain warden please contact: Whatsapp/Mobile Phone: +62 811 1721 338 (Ms. Ais) or Email : info@urbanplastic.id.