Knowing the drain warden price is essential. It is especially important if you want to make a plan about how much budget is needed to purchase this product. Actually, some manufacturers may have different prices based on several conditions.
The suppliers also have the same condition, especially if their location is far away from the manufacturers. However, before spilling about the price, it is better to understand this product first.
It is made of polypropylene geotextile material where the stormwater will enter there. Besides that, it also has the absorbent sock part that makes the drain warden price can be different as well. To know more about this item, please read more below.
The Drain Warden Price
Since the stormwater will get into the geotextile material, all dirt and contaminants will be filtered there. Theor are the silt, hydrocarbons, trash, and other types of pollutants.
The drain warden will easily absorb everything and filter those materials. Meanwhile, water will freely pass through this part without carrying dirt.
The installation is straightforward. The common drain warden price is around $150 for the size of 1200mm x 1200 mm (including bilge sock). Meanwhile, in the market, you will find some other sizes too.
Those sizes are 600mm x 600mm, 900mm x 900mm, 2400mm x 1200mm, and custom size. You can ask a manufacturer or supplier about that pricing, especially if you use the custom service.
Some Features and Additional Parts
The drain warden price can be also based on the product itself. It means that whether it has some additional features and parts or not.
The major function of this polypropylene geotextile is to filter and separate water from contaminants. Here are some features that are usually attached to a drain warden:
1. Polypropylene Pads
The manufacturers can add the polypropylene pads as well. These parts can provide up to 5-litre oil capture. It will ensure that an area safe and secure enough.
Besides that, there is also a pillow where it can absorb the hydrocarbon. You can find this product easily in some online or conventional stores around you.
2. Additional Ties
While installing this product, it is for sure that you want it to be held in place perfectly. It will be like that by the drain grate and some additional ties as well.
To install this stuff, just remove your drain gate and position this warden. Then replace the grate as well. Once the ties have been installed and the excess materials have been cut off, this unit is ready to work.
Further Inspection
After you get the best drain warden price and purchase this item, make sure to do further inspection after it is installed. Sometimes some products may need replacements.
To check everything, inspect this product after the rain event. Check various aspects such as whether the water is held or not, whether the filter is blocked or not, etc.
If everything goes well, you don’t need to replace or fix anything. One thing for sure is that never make the drain warden price the only consideration because quality is always beyond everything.
For more information about drain warden please contact: Whatsapp/Mobile Phone: +62 822 9933 3938 (Ms. Panni) or Email : info@urbanplastic.id.