It’s very vital to preserve roads in good shape for a long time, especially in cities and rural areas. People often select paved roads since they are smooth and last a long time. But adding non-woven geotextile can make a major difference in how long they last and how well they can handle heavy traffic and harsh weather. This stuff is highly significant because it makes the road stronger, keeps the soil in place, and makes the road survive longer. This guide will show you how to lay non-woven geotextile membranes on asphalt roads in a series of steps. This will help your road last longer.
Getting The Earth Ready and Levelling It
You need to get the ground ready before you put down the geotextile. Make sure the ground is level and stable before you start. You need to get rid of anything substantial that could get in the way, such tree roots or rocks, before you start putting things together. Check to see if the ground is level with a level or a measuring tool. The installation non-woven geotextile will only function if the surface is smooth and flat. Check the moisture level of the soil to make sure it isn’t too dry or too damp. This might affect how well the geotextile fits. Before moving on to the next level, the idea is to build a firm foundation.
Putting the Geotextile Bottom Layer On
It’s time to put in the bottom geotextile layer now that the site is ready. Put it down carefully so that it is flat on the ground and doesn’t have any bumps. The purpose of this layer is to make the soil underneath it stronger and more stable. This will provide the road a strong base. Make sure the seams are 10 – 20 cm apart when you put down the geotextile so that dirt can’t get through. It is important that the geotextile be flat and smooth since any folds could make it less effective at keeping soil from moving.
Setting and Putting Down Crushed Stone
Put crushed stone on top of the geotextile after you put it down. Spread the stone out evenly across the geotextile. This layer makes the ground strong enough to hold up the next steps in building the road. Use a roller or a vibrating plate compactor to make the crushed stone stronger. You have to compact the road in the appropriate way so that it can hold weight and be sturdy for a long period. You could drive on it and the road may sink or move if it isn’t packed down well enough.
Putting on The Top Layer of Geotextile and The Sand
After that, you should put on the top layer of geotextile. Like the one below it, this layer should be flat and smooth. It should also be a little taller than the layer below it. The top layer of geotextile makes the road stronger and keeps everything in place. Subsequently, place a layer of sand on top of the geotextile. Make sure it’s level and smooth it out with a rake. The sand layer keeps the road stable over time and makes the paving slabs smooth.
Putting The Stones Down for The Road
It’s time to put down the paving stones. Check that each block fits the design you picked and that there are no gaps between them. Use a clamp or a rubber mallet to carefully tap each block into place to make sure everything is precisely straight. You will need to compact the surface again after you put all the bricks in place. This last stage of compacting holds the paving blocks in place and makes sure the road will be safe even when there is a lot of traffic and bad weather.
If you want your paved roads to stay, be stable, and be strong, you need to put non-woven geotextile on them. If you do these things, you may be sure that your road will be able to manage traffic, the weather, and time. Get the site ready, lay down the geotextile layers, pack down the crushed stone, and then lay down the paving blocks. Non-woven geotextile makes the road stronger, keeps the soil from moving, and speeds up and smooths out the whole installation process. Non-woven geotextile is the best material to utilise to make a road that will last.
For more information about Geotextile please contact: Whatsapp/Mobile Phone: +62 811 1721 338 (Ms. Ais) or Email : info@urbanplastic.id.